Company Careers
Start A Project

DuroMaxx Rainwater Harvesting Cisterns

DuroMaxx Rainwater Harvesting Cisterns are constructed of DuroMaxx Steel Reinforced Polyethylene (SRPE) for a strong and durable storage solution. DuroMaxx cisterns are available in sizes up to 120 inches in diameter and 48 foot lengths. DuroMaxx cisterns are leak tested and labeled with the UPC seal to ensure a reliable long term storage solution. Contech hydrodynamic separator and filtration products provide pretreatment for stormwater prior to storage to provide the best water quality and reduced maintenance costs for the most demanding rainwater harvesting applications.

Cisterns for Stormwater Reuse and Runoff Reduction

Low Impact Development strives to eliminate runoff by promoting infiltrating wherever practical. If your site has high groundwater, soils with low permeability, bedrock, or other limiting conditions, infiltration alone may not provide enough runoff reduction to meet regulations. That’s why rainwater harvesting is an important tool to help meet runoff reduction requirements.

The DuroMaxx Rainwater Harvesting Cistern will help achieve stormwater management goals by reducing stormwater runoff while providing residual cost savings through the reduction of potable water use.

Rainwater Harvesting Pretreatment Devices

Pretreating stormwater prior to storage protects downstream pumps, filters, and fixtures from damage or clogging, and lowers cleaning and maintenance costs by keeping pollutants out of the cistern and mechanical system. Contech offers a number of pretreatment devices including:

CDS
The CDS hydrodynamic separator is the preferred rainwater harvesting pretreatment device. CDS is an underground stormwater treatment device that uses swirl concentration and continuous deflective separation to screen, separate and trap trash, debris, sediment, and hydrocarbons from stormwater runoff.  With CDS there is no need for “first flush” diversion, so no water is wasted. 

CDS captures and retains 100% of floatables and neutrally buoyant debris 2.4mm or larger and removes solids down to 100 microns. It is the only non-blocking screening technology available in a hydrodynamic separator. With large pollutant storage capacity and treating flowrates up to 1 cfs, the CDS can treat runoff from large areas with minimal maintenance.

Other pretreatment options include:

StormFilter
StormFilter uses rechargeable, media-filled cartridges to absorb and retain the most challenging target pollutants including dissolved metals, hydrocarbons, and nutrients metals and other common pollutants found in stormwater runoff. 

Jellyfish Filter
The Jellyfish Filter is an engineered Stormwater quality treatment technology featuring pretreatment and membrane filtration in a compact stand-alone treatment system, which removes a high level and a wide variety of stormwater pollutants.

DuroMaxx Rainwater Harvesting Cisterns

DuroMaxx SRPE
The DuroMaxx Rainwater Harvesting Cistern is made from DuroMaxx Steel Reinforced Polyethylene (SRPE). The eighty (80) ksi steel reinforcing ribs provide the strength and pressure rated polyethylene (PE) resin provides the durability. The combination of materials results in an extraordinarily strong and durable below ground cistern.

  • Available up to 120” diameter
  • Includes prefabricated access points
  • Lightweight - easily handled and quickly installed, often without the use heavy construction equipment
  • H-25 traffic rated design

UPCShield

Contech’s DuroMaxx Rainwater Harvesting Cisterns have been certified to be in compliance with the Uniform Plumbing Code (UPC®) by The International Association of Plumbing and Mechanical Officials (IAPMO) Research and Testing. Engineers can now write specifications for rainwater harvesting tanks based on a nationally recognized standard that address issues such as structural design, leakage, and repeatable manufacturing processes. Contech is only one of two companies that have received IAPMO/UPC certification for rainwater harvesting tanks.

 

 

The Contech Advantage


image
Agency/Regulatory Guidance

Our team is ready to provide you with expert advice and assistance on local regulatory requirements, resulting in faster approvals.

image
Solution Development

Our engineers can review your requirements, weigh all options, and recommend the optimal solution to integrate with your site designs.

image
Technical Expertise

Our engineers assist by providing product specific engineering calculations such as hydraulics, buoyancy, foundation reactions, and unit sizing.

image
Cost Estimates

We can quickly provide engineer’s cost
estimates to assist with your solution
selection process.

image
Site Specific Drawings

Our engineers can provide site-specific drawings for proposals, project meetings, and submittals, helping you be more efficient with your time.

image
On-site Assistance

Contractors know time is money, so we provide preconstruction meetings, delivery coordination, and on-site installation support to ensure a timely, smooth installation.