Company Careers
Start A Project

The International Stormwater Best Management Practices (BMP) Database project website (http://bmpdatabase.org) features a database that includes over 600 BMP performance studies.  This is a tremendous free resource for engineers, scientists, policymakers and others who seek to characterize the pollutant removal and hydrologic performance of various

Learn More

Over the last 20 years of site-civil design, it has been interesting to see stormwater trends come and go.  Some design methodologies have disappeared, only to return later or in a nearby geography as the “new” approach.  Agency directives can shift based on new leadership or the prevalent regional concerns at the time.  As the construction

Learn More

Months of design, pages of specifications, and tens or even hundreds of thousands of dollars may go into the design of a single bioswale, filtration basin, or other stormwater treatment system. So why do we spend so little time thinking about the flow control devices that make them work? This article is part one of a two-part series on bypass

Learn More

Oh stormwater treatment performance lab testing, your time-consuming, methodical steps make me want to pull my hair out. You often leave me with more questions than answers. However, the benefits often counterbalance the challenges. Thank you for answering my questions, even if I must endure the tedious steps of the scientific method; a method that

Learn More

Given the number of conversations I’ve had in recent months with other stormwater professionals that don’t entirely understand the value of incorporating the sediment mass load capacity of a filtration BMP into the design process, I feel it’s time to revisit the subject.  We tend to think about BMP design in terms of treatment capacity which is

Learn More

Hydrodynamic Separators (HDS) have been used in the stormwater industry for over 20 years.  They are effective at removing TSS, hydrocarbons, and trash and debris from stormwater runoff and are often used for standalone treatment or pretreatment to filtration, detention, infiltration and rainwater harvesting system.  With the varied applications

Learn More

The question of whether a hydrodynamic separator should be online vs. offline is something that engineers and stormwater treatment manufacturers deal with on a daily basis.  Online systems allow storm events that are greater than the design storm to be bypassed through the treatment unit, eliminating the need for a separate bypass structure.  This

Learn More

EPA selected a removal standard of 80% total suspended solids (TSS) removal as the target pollutant of concern due to high TSS concentrations ubiquitous impact on water quality and degradation to aquatic habitat. Many other pollutants of concern are particle-bound, and TSS is thereby a surrogate for other pollutants. Testing methodologies for

Learn More

The EPA selected a removal standard of 80% total suspended solids (TSS) removal as the target pollutant of concern due to high TSS concentrations impact on water quality and degradation to aquatic habitat. Many other pollutants of concern are particle-bound, and TSS is thereby a surrogate for other pollutants. Testing methodologies for stormwater

Learn More

Drafting stormwater regulations that are clear, comprehensive and effective is crucial to protecting and preserving receiving waters.  The Clean Water Act has yielded a wide spectrum of local stormwater regulations and policies, but many leave something to be desired when it comes to actually mitigating the impacts of urban runoff.  It has been our

Learn More

As an industry, we’ve acquired a vast amount of knowledge about stormwater, its adverse impacts, and the best management practices (BMPs) implemented to mitigate them. However, the spirited debate with regard to whether the field or the laboratory is the best arena for evaluating BMP performance refuses to yield to consensus. Here are some of the

Learn More

Given the limitations and challenges inherent of BMP evaluations, whether done in the field or the laboratory, it’s a wonder we bother with either. However, the intent of identifying these issues is not to discourage evaluation, but to foster understanding so as to encourage BMP evaluations to be structured in a manner that yields sound results.

Learn More

The intent of LEED Sustainable Sites Credit 6.2 is “to limit disruption and pollution of natural water flows by managing stormwater runoff,” and the requirements necessary for meeting this intent are clearly spelled out: capture 90% of the average annual rainfall and treat it by removing 80% of the total suspended solids (TSS). While the rating

Learn More

As an industry, we’ve acquired a vast amount of knowledge about stormwater, its adverse impacts, and the best management practices (BMPs) implemented to mitigate them. However, the spirited debate with regard to whether the field or the laboratory is the best arena for evaluating BMP performance refuses to yield to consensus. Here are some of the

Learn More

As the economic downturn continues to shrink state coffers budget cuts have rendered numerous government programs nearly inoperable. Unfortunately, stormwater management and other water quality initiatives have not been spared from a similar fate.Considering that many state and municipal stormwater programs were already operating with a skeleton

Learn More
 Search

Subscribe