<p>Relining Solutions for Culverts, Sanitary &amp; Storm Sewers and Structures</p>

Relining Solutions for Culverts, Sanitary & Storm Sewers and Structures

It is often possible to salvage failing structures and eliminate the time, cost and safety problems of complete replacement. Restoring structural and/or hydraulic capacity without road closure is usually achieved with less time, expense and disruption than the replacement alternative. Contech offers a variety of products and systems, combined with more than 100 years of experience, to facilitate rehabilitation of storm and sanitary sewers, culverts and bridges. Reline Done Right™

Relining with Steel Reinforced Polyethylene

Designed with a smooth inner wall for outstanding hydraulic capacity, DuroMaxx® pipe provides the properties necessary for long-term service and performance in the most demanding environments.

CMP and PVC Pipe for Pipe Reline

Lining inadequate or failing structures with corrugated metal material or plastic pipe uses little of the available area, thereby preserving the maximum amount of the original opening. Due to the hydraulic efficiency of Contech products, often a smaller structure provides the same hydraulic capacity as the original because of the low Manning “n” factors of A-2000 and A2 Liner PVC pipes and HEL-COR and ULTRA FLO CMP pipes. Existing pipes and arches are generally lined with structures of the same shape, though slightly smaller in size. Rectangular openings can be lined with round, elliptical or pipe arch structures. Corrugated metal structures can fit almost any existing shape.

CMP and PVC Pipe for Rehabilitating Storm, Sanitary Sewers and Small Culverts

Reline drainage structures with hydraulically efficient corrugated steel, aluminum or PVC pipe. ULTRA FLO and HEL-COR are CMP Pipes available in standard diameters through 120” and 144" respectively. Special diameters are also available in both products. The PVC pipe systems, A-2000 and A2 Liner Pipe—used for both drainage structures and sanitary sewers—are available through 36” diameter.

Trenchless Pipe Lining and Sewer Repair

When dealing with a closed system storm sewer, sanitary sewer or culvert with limited access, SPR™ PE pipe rehabilitation provides a solution for restoring hydraulic efficiency, reliability and integrity to these aging systems using a spiral, machine wound and trenchless pipe renewal process.

Structural Plate for Rehabilitating Bridges and Large Culverts

Bridges and large culverts can be relined by erecting our plate structures inside existing structures. Or, the new plate structure can be erected outside and threaded into existing openings. Our Plate Structures, including Two-Flange Liner Plate, are delivered to the job site unassembled. The plates and ribs are easily bolted together to form various shapes: round, vertical and horizontal ellipse, pipe-arch, underpass and arch.

Precast Structures for Bridge Rehabilitation

CON/SPAN O-Series, B-Series and BEBO bridge structures can cost-effectively and quickly be installed to support concrete bridges that exhibit deterioration in the concrete superstructure and upper portions of the abutments – utilizing the existing foundation. In most cases, in a single day, the bridge arches can be positioned leaving the existing beam bridge and abutments in place.

Bridge Plank for Deck Rehabilitation

The easy and economical solution is to replace noisy, worn-out wood floors or deteriorated concrete decks with Contech Bridge Plank. Corrugated steel Contech Bridge Plank has a proven track record from coast to coast on many types of bridges, including skewed structures.