South Kansas River Pump Station

Topeka, Kansas
Rehabilitation/Relining
Owner:
City of Topeka, Department of Public Works
Engineer:
Bartlett & West - Topeka, KS
Contractor:
Garney Construction - Kansas City, MO
Technical Description:
  • SPR™ PE
  • 453 LF of structural lining for a 78” diameter reinforced concrete pipe
Installation:
October 01, 2013

The City of Topeka had scheduled the repair of several hundred feet of deteriorating reinforced concrete pipe (RCP) sanitary sewer line at their South Kansas River Pump Station in the fall of 2013.Rather than undergo a costly replacement that would close the pump station and interrupt the high water flow during excavation, the City looked into optional rehabilitation and slip lining methods. Their intent was to install a liner to restore the structural integrity of the original 78” diameter pipe and prevent failures while reducing the groundwater infiltration into the system.

Given the 18 feet of cover over the existing reinforced concrete pipe, SPR™ PE pipe liner supplied by Contech Engineered Solutions and SEKISUI Chemical Co. LTD was the selected material of choice for this project. In this way, they could reline the system completely from one access hole. The SPR PE pipe lining system consists of a single strip of steel reinforced HDPE profile which is progressively wound into the existing pipeline by a mobile winding machine positioned at the base of an access chamber. The edges of the profile are fusion welded together by the winding machine, forming a continuous watertight liner.

The reline installation was conducted under live flow, which reduced the need for bypass pumping of the sanitary sewer effluent. This is an advantage of SPR PE over other reline technologies. The equipment and pipe profile were placed through a 22” manhole opening, and the project sub-contractor, SAK Construction, LLC, was able to line the entire 453 LF of the deteriorating reinforced concrete pipe with the steel reinforced SPR PE profile in only three days.

Andy Wright, P.E. of Bartlett & West, stated, “Contech’s SPR PE pipe liner ended up being the most cost effective solution for this project because the liner could be installed without modifying the existing structures to access the pipe. The live flow installation was another advantage that reduced the project’s bypass pumping time and subsequently the overall cost”

800-338-1122 | www.ContechES.com
© 2017 Contech Engineered Solutions LLC